My Zimbio Car Speaker Modification: Audi Car design
Showing posts with label Audi Car design. Show all posts
Showing posts with label Audi Car design. Show all posts

How To Get More Bass In Your Car

car tuningIn just seven steps this article will guide you on How to Install a Sub woofer in a Factory Stereo. Very often people who are passionate about adding new additional features to their car stereo like sub woofers take the help of audio profesionals to do the job. But this job is not at all complicated and can be done without any experience by following simple steps. In this article we shall also discuss the importance of installation of sub woofers, tips and warning for doing this job.

Depth and powerful sound are important for good quality of music. Speakers can be installed at various places inside the car like door panels, dash and rear decks. They enhance the sound effect for higher notes. But to enjoy lower tones adding a sub woofer to a factory stereo is the best choice. Let us see how to do that now.

First we look into list of things needed to complete this work. They are trim panel removal tool, speaker wires and Philips head screw driver. First we should remove the connection of ground cable with the battery of the car. Usually the negative lead of car battery connects the car frame. To do this we shall take the help of Philip head screw driver which loosens the clamp of the cable connected to the negative lead of the battery.

Second step is to find out the amplifier. If it is not an after marker amp and if it is factory installed one vehicle manual can help us locate the amplifier of the vehicle. Next step is to decide where the woofer should be placed. The choices available are car trunk or hatch back or cargo area of SUV on the rear side.

Fourth step is very important. The speaker wires should be connected with the positive and negative terminals of the amps correctly. The next step needs some attention. The wires of the speaker should be routed to the place where sub woofers are present. Suppose if the location of sub woofers is not near the amplifier then wires can be taken under the carpet of the vehicle. Use trim panel removal tool for prying of panels at the openings of the door. The trim panels can be replaced by hand itself after laying the wires under the carpet.


tuningThe other end of the speaker wires are then connected with the input sockets of the sub woofer correctly. Ensure that always positive is connected to positive input and negative with negative input of woofer

Design of the Exotic Car Audio Crazy

fusion audio system with speakers in the rear seat design will produce a booming sound like the sound of music concerts.
 
various crazy idea of music and art lovers to pour a big fan of creation and the music world menajdikan sebaga car audio arena for impingement his love of music.








Spesification New Audi R8 Spyder


Spyder Audi R8 5.2 FSI quattro makes a powerful statement. Carve lines with emotion, high-performance sports car is a unique and exciting interpretation of his dynamism. Coupé is not like that, Spyder has no sideblades behind the door. side panels and a large cover over the storage compartment to the top fabric made of carbon fiber composites. Two curved cowls, which extend into the spoiler lip and covers, large air vents integrated, giving the rear profile of a powerful two-seater open top.

V10 engine produces 386 kW (525 hp) and launched an open-top two passengers up to 100 km / h (62.14 mph) in 4.1 seconds on its way to a top speed of 313 km / h (194.49 mph). Features such as the Audi Space Frame technology (ASF), permanent quattro all-wheel-drive, full LED light and a microphone, an innovative seat belt available as an option, R8 Spyder 5.2 FSI quattro is the new top-of-Audi with distance. As an open-top Audi, R8 Spyder 5.2 FSI quattro has fabric - without compromising solution for high-performance sports car. on the approximate weight of this software is only 30 kilograms (66.14 pounds), so the total vehicle weight and center of gravity low. above happened a little when it opened and is a harmonious design elements when closed. This slope into two thin fins extending to the edge of the trailing car, pressing the elongated silhouette.


Peak electrohydraulic soft opening and closing within 19 seconds, even while driving at speeds up to 50 km / h (31.07 mph). When it opened, like Z folds into a storage container for the V10 engine. Compartment lid will open and close automatically. Heated glass window, separate from the top of the fabric, was lowered into the bulkhead. This can be independently raised and lowered on the switch press, with the top up or down. -A net additional wind deflector comes as standard and can be locked into the bulkhead behind the seats in two easy steps.

The upper part, which consists of the outer shell of textile fabric and the main leakproof, fully compatible with high speed driving. When driving at moderate speeds with a peak above the noise level in the interior R8 Spyder barely higher than in the Coupé it. bulkhead including an integrated rollover protection in the form of two plates of a strong, spring-tensioned. Head / thorax side bags on the backrests to protect passengers in case of side impact. Full-size airbags standing ready in case of collision. In a rear collision, the limitation of the system is an integral part of the head reduces the risk of whiplash injury.


Many details indicate that the Audi designers put their hearts into the design R8 5.2 FSI quattro Spyder. Air holes in the nose, the air directly in the three radiators, front skirt and lip gloss painted black. Strut in the low, single-frame grille with wide chrome-plated fine. LED full art technical standards. they resemble the reflector shells open; daytime running lights look like a strip of homogeneous, but actually consists of 24 individual LEDs are formed on the edge of the curve under the lights.

Audi LED lights full light unmatched by its international competitors. Light-emitting diodes are used for low beam, high beam, daytime running lights and turn signals. With a color temperature of 6000 Kelvin, LED light is very similar to daylight, making it easier on the eyes when driving at night. Additional strengths include an excellent light distribution, long service life and very low energy consumption.

This side sills of R8 5.2 FSI quattro Spyder width and angle. V10 badges on the engine power to offend the pelvis. A dark surface between the taillights emphasize the width. The rooms in the old red lights, LEDs produce light with three-dimensional pattern. exhaust system ending in two large, oval tailpipes, and the journey ends in the diffuser underbody completely reversed. rear spoiler extends automatically at higher speeds.


Audi R8 Spyder offers a 5.2 FSI quattro with a choice of three colors for the top. Body paint finish is available in eleven, with pearl effect finish and metal standards. Glass coated with anodized aluminum frame.


The two-seater open-top of the Audi has a spacious interior with generous. multifunction sports steering wheel, three-spoke leather is flat on the bottom of the dragster, and low-mounted, electrically adjusted seats that perfect body support and guidance.

Quality fit and finish is exceptional and a clear and logical controls. Standard driver information system includes lap timer to record lap times. Instruments and equipment, ring lever has a red button. Pedals, footrests and R Tronic paddle shift from optional in view of the aluminum. Highlighting the list of standard equipment is generous display the full package of Fine Nappa leather skin, good sound system from Bang & Olufsen, a deluxe automatic air conditioning system and hot seat. Six different interior colors are available.

Many additional features two status documents Spyder Audi R8 5.2 FSI quattro. Skin for seats with colored pigment that reflects the infrared component of sunlight, which makes seats up to 20 degrees Celsius (68 degrees Fahrenheit) cooler.

Threshold strip, coated with aluminum and decorated with black satin finish applications inculcate attitudes luxurious sportiness. Three storage compartments integrated into the rear bulkhead, one of which contains a CD changer or optional Audi music interface, if desired. There is a front compartment for 100 liters (3.53 cubic feet) of luggage.

The latest version of the navigation system plus with MMI standard operating logic is also in the R8 5.2 FSI quattro Spyder. It features a higher resolution and faster route calculation in particular. This new feature will be seen most systems of high-resolution, 6.5-inch screen. Topography of the screen can scroll in any direction. This system can be optionally combined with a spy camera that function as aids parking.



Audi offers another extra, such as exclusive leather package and special inlays. A world first is a microphone for optional belt hands free unit, which makes it possible to talk on the phone, even with the top down on the highway. Three small, flat microphone integrated into the seat belt. At least one of them is the ideal position when the belt relative to the active speaker. There are four microphones in a glass frame.


The Spyder Audi R8 5.2 FSI quattro, developed in cooperation with the quattro GmbH, which dazzles with uncompromising performance. V10 engine with aluminum crankcase, which is mostly hand-built, following the tradition of the Audi motorsports. Normally aspirated engine produces 530 Nm (390.91 pounds-ft) of torque at 6,500 rpm. Peak output of 386 kW (525 hp) is achieved at 8000 rpm, and the rev limit is not reached until 8700 rpm. specific power output of 100.9 hp per liter displacement, each only need to remove hp 3.3 kg (7.28 lb) weight.
Related Posts Plugin for WordPress, Blogger...